Italiano English Ctrl+P to print
Products: tempel
Offcarr

Thanks for choosing an OFFCARR product.

OFFCARR listens and responds to the customers' needs by engineering highly technical, innovative solutions aimed at reducing daily mobility problems, with special attention to product style and to improving quality of life.

OFFCARR has a certified system for quality management following UNI EN ISO 9001 regulations and a Medical Device - Quality management system following UNI EN ISO 13485 regulations.

OFFCARR products comply with the european medical device regulation UE MDR 2017/745.

Important

Before using or making adjustments on this device, read this instruction manual carefully.
Important Different versions of this manual, accessible for various types of visual disabilities are available on www.offcarr.com

Contact an authorized dealer or the manufacturer at the following address if clarification regarding the safety measures is required.

Manufacturer symbol

OFFCARR srl
Via dell’Artigianato II, 29
35010 Villa del Conte (Padova) Italy
Tel. +39 049 9325733 Fax +39 049 9325734
Email: offcarr@offcarr.com
www.offcarr.com

Origin country symbol

MADE IN ITALY

Distributor symbol

Distributor:

Space for distributor info

1. Labelling

Each OFFCARR product is identified by a unique serial number. The serial number, along with other information is visible on the product stickers applied to the frame.

Sticker position on the product frame

Stickers position on the product frame

Identification sticker

Product sticker (applied on the frame)

UDI sticker

UDI sticker (applied on the frame and on the instructions for use)

Information available on the product sticker:

  1. Manufacturer

  2. Read the instructions

  3. Maximum load

  4. CE symbol

  5. Serial number

  1. Manufacturing date

  2. Medical device

  3. UDI number

  4. Model

1.1. Symbols description

Read the manual symbol

Please read all instructions before using the device. Read all Cautions and Warnings carefully.

CE symbol

European Conformity - The symbol denotes conformity to European standards.

WARNING symbol

WARNING: Read carefully and follow the indications.

NOTE symbol

NOTE: Auxiliary information.

Medical device symbol

Medical Device

UDI symbol

UDI: Unique Device Identifier

Serial number symbol

Serial Number

Order number symbol

Reference - The symbol indicates the model of the product.

Origin country symbol

The symbol indicates the country of origin.

Distributor symbol

The symbol indicates the distributor of the product.

Manufacturer symbol

The symbol indicates the manufacturer of the product.

User Weight symbol

The symbol indicates the maximum load permissible for the product.

Weather symbol

The symbol denotes the importance of protecting the packaging and the product from harsh weather.

Tall and Fragile symbol

The symbol denotes that shipment must be performed with care and the package must always be kept and stored with the arrows pointing upwards.

2. Device Use

Important To use the device correctly and safely, it is always recommended to clarify any doubts with qualified personnel.

Below are some tips and recommendations for the correct use of the device, aimed also at maintaining its safety and durability over time:

  • The device should only be used for transporting one person and not objects.

  • Avoid wheeling the device without proper training or the supervision of an assistant. *Given the significant imbalance characteristic of this type of aids, it is recommended to perform transfer operations from/to the device always under the supervision or help of an assistant.

  • Prolonged contact of the device with water or prolonged exposure to high humidity levels can cause unwanted oxidation of some metal parts and the degradation of the safety characteristics of the involved materials.

  • Avoid contact with seawater and sand. In case of contact, proceed with immediate and thorough cleaning.

  • Perform a general check of the device at least every three months, verifying the inflation of the tires and the efficiency of the brakes; lubricate the moving parts when necessary.

  • Clean the device with a damp cloth and avoid partially or fully immersing the frame. Keeping the device clean increases its efficiency.

  • Suspend the use of the product and inform OFFCARR in case of allergies or other similar problems due to contact with the materials that make up the device.

  • The fabric used for the device’s coverings is washable with low-temperature water. In any case, avoid wetting or immersing other parts of the device.

  • There is no danger of causing injury to people during the preparation and adjustment operations of the device if performed carefully following the instructions provided in this manual.

Important Ensure that the tires are correctly inflated. The inflation pressure depends on the tire model; find the correct pressure indicated on the tire sidewall.
Important

Keep the device away from heat sources as not all components are fireproof.
Note

The coverings meet the requirements of EN 1021-2:2014.

3. Main precautions to reduce any risks associated with improper use of the device

Important It is forbidden to use the device or its parts in ways other than those described in this manual.

The device should only be used for the sport for which it was designed or compatible disciplines and not for the transportation of objects in general, or used in different contexts. It may become dangerous as it lacks some common safety features found in walking wheelchairs such as parking brakes, etc.

Important The space between the wheels and the sideguards or brakes can be less than 25 mm. Be careful not to put your fingers between the wheels and the sideguards or brakes to avoid injury.
Important To maintain the device and its safety requirements, it is recommended to adhere to a regular maintenance schedule as described in this manual.
Important Poor maintenance and improper use of the device can cause damage or injury to the user or the assistant.
Important Any tampering with the components of the device, in addition to voiding the warranty, could compromise its structural integrity and safety standards.
Important Contact OFFCARR in case the user’s maximum weight is exceeded at any time during the life of the device.
Important Contact OFFCARR or your dealer to verify compatibility with accessories produced by a manufacturer other than OFFCARR.
Important Do not install mechanical or electronic devices not approved by OFFCARR on the device and do not modify its structure in any way. Any combination with other medical devices must be expressly authorized by OFFCARR. If the combination has been approved, always refer to the respective manuals.
Important The device and its accessories are not suitable for use in hyperbaric chambers under any circumstances.
Important In case of prolonged exposure to the sun, the surface of the device can reach high temperatures.
Important Some openings in the device may have angles less than 75° (e.g., the space between the wheel spokes) or spaces less than 25 mm (e.g., the spaces between the spokes). Pay attention.
Important Inflate the tires to a pressure not exceeding that indicated on the tire itself. In case of air transport, it is suggested to deflate the tires to avoid overpressure.
Important Do not exceed the maximum load capacity of the device, not even temporarily. For example, do not perform activities such as weightlifting on the device.

4. Product presentation

4.1. TEMPEL

TEMPEL is a wheelchair designed to meet the needs of adults and young people with motor disabilities who are approaching athletics practiced on track and road. Made of light aluminium alloy, it can be configured according to the needs of athletes with different pathologies.

The configuration must be performed exclusively by qualified personnel.

Important The use of the wheelchair and its parts for improper or different use than provided in this manual is prohibited.

4.1.1. Description

The TEMPEL athletics wheelchair features an aluminium alloy frame designed for track and road activities. The rear wheels are 28”, cambered at 11°. The front wheel is 20” and is equipped with a central brake lever with a deceleration function. The frame and upholstery can be made in various colors.

4.1.2. TEMPEL Features

  • Aluminum alloy frame

  • Front wheel diameter: 20"

  • Traction wheel diameter: 28”

  • High-pressure pneumatic or tubular tires

  • Predetermined camber: 11°

  • Rubber-coated aluminum push rims of 32, 35, 38, or 40 cm

  • Adjustable height and tilt footrest

  • Foot strap: standard

  • Tensioned and adjustable backrest fabric

  • Directional lever for track use

  • Handlebar for marathon use

  • Front wheel brake

  • Weight: 11 kg

5. Preparation for use

Important The preparation for use of these devices must be performed by qualified personnel to ensure the specific suitability of the product for the user and the correct working order of all parts and accessories, as well as to provide clear instructions to the user.

5.1. Tire Pressure Check

Periodically checking tire pressure helps maintain the efficiency of the wheelchair and provides greater comfort of use.

Check the tire pressure value against the value indicated on the tire.

Important In case of air transport, it is recommended to reduce tire pressure to minimize the effect of pressure variations due to altitude.

5.2. Accessories check

Some accessories required when setting up the device may be supplied separately. You must assemble them and check their operation before you start using the device.

6. Maintenance, Inspections, and Checks

Weekly:

  • ✓ Check the tire pressure. Each tire indicates the pressure for which it is designed on the sidewalls. A deflated tire compromises the smoothness of the wheelchair.

  • ✓ Verify the correct tightening of the push wheel axles and, if necessary, lubricate the pins and bushings with lubricant.

  • ✓ Check the tension of the backrest fabric to maintain a comfortable position.

Quarterly:

  • ✓ Check the efficiency of the bearings on the push wheels, front wheel, and handlebar rotation. If necessary, proceed with the replacement of the bearings (see 6.3, “Replacing rear wheel bearings” and [replace_bearings_front]).

  • ✓ Lubricate moving parts such as joints, axles, and bushings. We suggest using silicone oil as it is efficient and does not stain.

Important It is recommended to use only original spare parts.
Contact OFFCARR in case of difficulty in finding original spare parts and accessories on the market.
Important It is recommended to rely exclusively on expert and authorized personnel for any maintenance, adjustment, and replacement of parts that make up the device.

6.1. Replacement of tyre and inner tube

6.1.1. Removing the tyre and inner tube

  • Deflate the wheel

  • Insert a special lever between the rim and the shoulder of the tyre so that when the lever is overturned, the side of the tyre comes out (fig. 1 and 2).

Tyre/tube disassembly 1

Tyre/tube disassembly 2

  • Insert another lever 100mm away from the previous point and repeat the operation (fig.3).

  • Slide the two levers along the circle to free the entire shoulder of the tyre.

Tyre/tube disassembly 3

  • Extract the inner tube, starting from the side opposite the inflation valve (fig. 4).

  • Once the inner tube has been extracted, it is easy to remove the tyre to replace one or both of them.

Tyre/tube disassembly 4

6.1.2. Assembling the inner tube and tyre

  • Insert the (partially deflated) bladder into the tyre (fig. 5)

  • Insert the chamber inflation valve into the hole on the rim.

  • Insert one side of the tire entirely on the rim, paying attention to the direction of the tire tread pattern depending on whether the push wheel is right or left.

  • Insert the opposite shoulder on the rim as well, starting from the point where the valve is positioned and continuing in both directions.

  • Insert the last part of the shoulder with the help of the special levers by following the instructions represented in Fig. 3, Fig. 2 and Fig. 1 backwards.

  • Inflate the wheel to the pressure indicated on the side of the tyre.

Tyre/tube assembly

6.2. Front Wheel Replacement

Loosen nuts A and B, as shown in the figure, and remove the front wheel by pushing it downward. Insert the new wheel into the fork and tighten nuts A and B.

  • Loosen nuts A and B, as shown in the figure.

  • Remove the front wheel by pushing it downward.

  • Insert the new wheel into the fork and tighten nuts A and B.

Front wheel replacement

6.3. Replacing rear wheel bearings

Disassembly

  • The bearings in the push wheels (B1 and B2) are press-fit. To extract them it is necessary to push them from the inside with the aid of an extractor or a pin punch and a hammer.
Bearings replacement

Assembly

  • Position the new bearing B1 on the inside of the hub so that it is coaxial with the hub and apply pressure to seat it.

  • Before positioning the second bearing B2 insert the axle A to use it as a guide for the second bearing and to ensure coaxiality of the system.

6.4. Rear Wheel Axle Check

Once the wheel is mounted as shown below and the axle is screwed in clockwise, pull the wheel outward and push it inward towards the wheelchair to check that there is no play.

Wheel removal diagram

7. Cleaning instruction

Important Cleaning and disinfection procedure have to be performed exclusively by qualified personnel.
Important Follow the instructions on this manual to perform the cleaning and disinfection procedure.
Important Use appropriate eye/facial protection and protective gloves, during cleaning and disinfection procedure.

In case of contamination with blood or other body fluids, the device has to be cleaned first and then disinfected as follows:

Note Most of the time is convenient and more effective to remove the upholstery from the frame before to proceed with the cleaning and disinfection of either frame or upholstery.

FRAME

  • Wash the device with lukewarm water and neutral detergent using a damp cloth to remove gross soiling

  • Remove eventual detergent residuals only with lukewarm water

  • Dry the device prior to further processing

  • Visually inspect the cleanliness of the complete device

  • Disinfect the device using 70-90% alcohol

  • Be sure it is completely dry before proceeding with use

UPHOLSTERY

In case of the user remaining the same before and after the cleaning treatment:

  • Wash, rinse, dry and disinfect the upholstery using the same process used for the frame

  • Be sure the upholstery parts are completely dry before reassembling them

In case of different user after the cleaning treatment:

  • The best course of action is to change the upholsteries with a new set

Note During the cleaning process the device should be also carefully inspected for damage, oxidation and faults in function. If any damage or faults are found, the involved components should be removed for service, repair or replacement.
Important All waste materials related to this process must be disposed in compliance with specific local applicable law.

8. Technical service

For any service request, please contact OFFCARR supplying the following indications:

  1. Model

  2. Serial number

  3. Fault description

  4. Any reference or order number, if available, recorded on the order form.

  5. Dealer

Every component of the device is available as spare part.

9. Warranty terms

It is strongly advised to register the product on the website www.offcarr.com after delivery.

  1. The device’s frame is guaranteed for 2 (two) years from the delivery date.

  2. The label showing the serial number, the manufacturer address and the CE symbol cannot be removed for any reason to preserve the warranty validity.

  3. Parts subject to normal wear and tear are not covered by the warranty, unless specific wear is caused by evident manufacturing fault.

  4. During the warranty period OFFCARR may proceed at its own discretion to change or to repair the faulty parts.

  5. The warranty does not cover damage due to negligence, carelessness, misuse or by incorrect maintenance performed by non authorized personnel.

  6. If any damage occurred during transport, the forwarder company is the only responsible. It is important to inform immediately both the forwarder company and, for information, OFFCARR.

  7. The warranty does not cover injury or any other damage to people or goods connected to the device’s malfunctioning.

10. Packaging, shipment and delivery

All OFFCARR products are shipped in closed cardboard cases to protect them from bumps and dust.
The package includes the device configured according with the order form, this Instruction manual and a tool kit.

The device must be transported in trucks that protect it from atmospheric agents, as shown on the packaging box.

Upon receipt, check the box integrity: open the package, remove the device and check it for damages. In case of problems, note your remark on the waybill and immediately notify both the forwarder and, for information, OFFCARR.

Once these checks, mandatory to ensure the validity of the warranty, have been carried out, place again the device in its packing until it is used and store in a cool and dry place (between - 15 and + 50 °C and with a relative humidity lower than 80 %).

Do not place any objects over the packaging box.

The packaging materials follow the European directive 94/62/EC[13].

11. Correct disposal and recycling

OFFCARR products are made of aluminium alloy (Al 7020, Al 6082, Al 2017, Al 6061, Al 5754), titanium, steel, stainless steel, carbon fibre, polyurethane, epoxy resins, other composite materials.

Recycle or disposal of all materials must be in compliance with the local applicable laws.

Contact your dealer in case of doubt or for help when disposing the device.

12. Adjustments

Considering potential setup restrictions it is still possible to perform other adjustment to hone in the wheelchair to the specific user.

Important Please refer to authorized and qualified personnel to perform the adjustments described in this manual.

12.1. Backrest Adjustment

It is possible to adjust the backrest to make it more or less deep by loosening or tightening the fabric or fixing the fabric in an advanced position on the backrest tubes in order to find the right center of gravity for the athlete on the wheelchair.

  • Lift the fabric at the back

  • Loosen or move the straps

  • With the athlete in the usage position, tighten the straps starting from the top one

  • Fold the backrest fabric again

  • Try some movements and, if necessary, repeat the operation if the posture is not as expected

12.2. Seat Adjustment

It is also possible to adjust the seat to make it higher or lower by loosening or tightening the fabric or fixing the fabric on the tube at the desired height in one of the two positions.

12.3. Footrest Adjustment

  • Unscrew the fixing screws

  • Slide the footrest to the position most suitable for the user

  • Re-tighten the locking screws

12.4. Steering Adjustment for Front Wheel Curvature

To set the turning radius on the track, it is necessary to act on the adjusters C on the reference lever B.

The two adjustments determine the turning radius while taking the turn and the straight direction on the straights.

For road racing, turns are made by acting on handlebar A, which returns to the initial position whenever the steering is released.

Sostituzione ruotina anteriore
Note It is important to consider that the two steering systems are independent of each other.















OFFCARR s.r.l. reserves the right to make improvements and/or changes on its products, at any time without prior notice, with respect of the device features, suitability, certifications, warranty contract and availability of spare parts according to the terms of law.